 |
Washington Administrative Code (Last Updated: November 23, 2016) |
 |
Title 468. Transportation, Department of (See Title 88) |
|
Chapter 468-95. Manual on uniform traffic control devices for streets and highways. |
Section 468-95-200. Approach markings for obstructions.
Latest version.
- Amend paragraph 01 of MUTCD Section 3B.10 to read:Pavement markings shall be used to guide traffic away from fixed obstructions within a paved roadway. Approach markings for bridge supports, refuge islands, median islands, toll plazas, and channelization islands (except channelization islands formed by paint stripes or raised pavement markers) shall consist of a diagonal line or lines extending from the center line or the lane line to a point 1 to 2 feet to the right side, or to both sides, of the approach end of the obstruction (see Figure 3B-15).Amend paragraph 07 of MUTCD Section 3B.10 to read:If traffic is required to pass only to the right of the obstruction, the markings shall consist of a no-pass marking, approaching the obstruction, at least twice the length of the diagonal portion as determined by the appropriate taper formula (see Figure 3B-15).Modify MUTCD Figure 3B-15, Item a - Center of two-lane road, to show a single no-pass marking on the approach to the obstruction.