Section 296-96-02466. ASME A17.1-8.9 Code data plate location and material.

Latest version.

(1) An individual data plate shall be provided and maintained for each unit (see 1.1.1). The data plate shall indicate:

(a) Code to be used for inspections and tests (see 8.10.1.2);

(b) Code and edition in effect at the time of installation; and

(c) Code in effect at the time of any alteration and indicate the applicable requirements of 8.7, including reference number.

(2) The data plate shall be of such material and construction that the letters and figures stamped, etched or cast to the face shall remain permanently and readily legible. The height of the letters and figures shall be not less than 3.2 millimeters (0.125 inches).

(3) All data plates shall be provided with either of the additional requirements listed in 8.9.3 (a) or (b).

[Statutory Authority: Chapter 70.87 RCW. WSR 13-24-066, § 296-96-02466, filed 11/27/13, effective 1/1/14.]

Chapter 70.87 RCW. WSR 13-24-066, § 296-96-02466, filed 11/27/13, effective 1/1/14.

                    
                        var val = document.getElementById('citecontent').innerHTML;
                        art.dialog.defaults.title = window.location.href;
                        art.dialog.data('cite', val);
                        art.dialog.data('homeDemoPath', '/Scripts/plus/artDialog/');
                        art.dialog.open('/Scripts/plus/artDialog/citeiframe.html');