Section 296-835-13015. Meet specific requirements if you use a flow coating process.

Latest version.

You must:

(1) Make sure all piping is substantial and rigidly supported.

(2) Make sure the paint is supplied by a:

• Gravity tank that does not hold more than ten gallons (38 L)

OR

• Direct low-pressure pumping system.

(3) Have an approved heat-actuated device that shuts down the pumping system if there is a fire.

Note:
The area of the sump, and any areas on which paint flows, should be included in the area of dip tank.

[Statutory Authority: RCW 49.17.010, [49.17].040, and [49.17].050. WSR 02-15-102, § 296-835-13015, filed 7/17/02, effective 10/1/02.]

RCW 49.17.010, [49.17].040, and [49.17].050. WSR 02-15-102, § 296-835-13015, filed 7/17/02, effective 10/1/02.

                    
                        var val = document.getElementById('citecontent').innerHTML;
                        art.dialog.defaults.title = window.location.href;
                        art.dialog.data('cite', val);
                        art.dialog.data('homeDemoPath', '/Scripts/plus/artDialog/');
                        art.dialog.open('/Scripts/plus/artDialog/citeiframe.html');


Note:	The area of the sump, and any areas on which paint flows, should be included in the area of dip tank.