Section 296-806-48074. Make sure shapers meet these requirements.

Latest version.

(1) You must guard the cutting head of the shaper by enclosing it with either:

(a) A fixed guard, such as a cage; or

(b) An adjustable guard designed to keep the operator's hand away from the cutting edge.

(2) You must make sure the diameter of a circular shaper guard is at least as large as the greatest diameter of the cutter.

Note:
A warning device of leather or other material attached to the spindle is NOT an acceptable substitute for a guard.

(3) You must guard all sections of the cutting tool except for an opening to allow access to the work piece by the cutting tool.

Note:
A ring guard is one means of satisfying the guarding requirement for cutting tools when involved in free hand or template shaping.

(4) You must make sure all double-spindle shapers have a spindle starting and stopping device for each spindle.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-48074, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-48074, filed 6/29/04, effective 1/1/05.]

RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-48074, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-48074, filed 6/29/04, effective 1/1/05.

                    
                        var val = document.getElementById('citecontent').innerHTML;
                        art.dialog.defaults.title = window.location.href;
                        art.dialog.data('cite', val);
                        art.dialog.data('homeDemoPath', '/Scripts/plus/artDialog/');
                        art.dialog.open('/Scripts/plus/artDialog/citeiframe.html');


Note:	A warning device of leather or other material attached to the spindle is NOT an acceptable substitute for a guard.


Note:	A ring guard is one means of satisfying the guarding requirement for cutting tools when involved in free hand or template shaping.