Section 296-806-40506. Make sure safety guards meet specific requirements.  


Latest version.
  • You must make sure the machine safety guards meet the requirements of Table 405-1, Guard Requirements.
    Note:
    1. The maximum exposure angle is measured by lines starting at the center of the spindle and extending to the ends of the guard at the wheel periphery.
     
    2. Visors and other accessory equipment are used in determining the size of the guard opening only if they are at least as strong as the safety guard.
    Table 405-1
    Guard Requirements
    [Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-40506, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-40506, filed 6/29/04, effective 1/1/05.]
RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-40506, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-40506, filed 6/29/04, effective 1/1/05.