Section 296-78-590. Gang saws and re-saws.  


Latest version.
  • (1) Gang saws and re-saws shall be fully guarded or housed in accordance with conditions. Cranks, pitman rods, and other moving parts shall be guarded.
    (2) Feed rolls shall be enclosed by a cover over the top, front, and open ends except where guarded by location. Drive mechanism to feed rolls shall be enclosed.
    (3) Feed rolls shall be enclosed and if the operator stands within thirty inches of the feed rolls, they shall be so guarded as to prevent operator coming into contact with them.
    (4) Circular re-saws or rip saws, except power feed rip saws with a roller or wheel back of the saw, shall be provided with splitters or spreaders.
    (5) A hood of metal or wood of sufficient strength to give protection against splinters or flying teeth shall be provided over all circular rip saws.
    (6) That portion of the saw extending below the table shall be so guarded as to prevent contact.
    (7) Circular rip saws shall be equipped with a standard anti-kickback device.
    (8) Carriage cradles of whole-log sash gang saws, Swedish gangs shall be of height to prevent logs from kicking out while being loaded.
    (9) Band re-saws. Band re-saws shall meet the specifications for band head saws as required in WAC 296-78-570(7).
    (10) Circular gang re-saws.
    (a) Banks of circular gang re-saws shall be guarded by a hood to contain teeth or debris which can be thrown by the saws.
    (b) Circular gang re-saws shall be provided with safety fingers or other anti-kickback devices.
    (c) Circular gang re-saws shall not be operated at speeds exceeding those recommended by the manufacturer.
    (d) Feed belts and drive pulleys shall be guarded in accordance with chapter 296-806 WAC, Machine safety.
    (e) Each circular gang re-saw, except self-feed saws with a live roll or wheel at back of saw, shall be provided with spreaders.
    [Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 04-14-028, § 296-78-590, filed 6/29/04, effective 1/1/05. Statutory Authority: RCW 49.17.040, 49.17.050 and 49.17.240. WSR 81-18-029 (Order 81-21), § 296-78-590, filed 8/27/81.]
RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 04-14-028, § 296-78-590, filed 6/29/04, effective 1/1/05. Statutory Authority: RCW 49.17.040, 49.17.050 and 49.17.240. WSR 81-18-029 (Order 81-21), § 296-78-590, filed 8/27/81.

Rules

296-78-570,296-806,