Washington Administrative Code (Last Updated: November 23, 2016) |
Title 296. Labor and Industries, Department of |
Chapter 296-78. Safety standards for sawmills and woodworking operations. |
Section 296-78-56507. Log decks.
Latest version.
- (1) Dry deck storage.(a) Dry deck storage areas shall be kept orderly and shall be maintained in a condition which is conducive to safe operation of mobile equipment.(b) Logs shall be stored in stabilized piles, and roadways and traffic lanes shall be maintained at a width adequate for safe travel of log handling equipment.(c) Logs shall be arranged to minimize the chance of accidentally rolling from the deck.(2)(a) Employees shall not spool cable on winch or drums with their hands.(b) Log wells shall be provided with safeguard to prevent logs from rolling back into well off log deck.(3) Jump skids on log decks shall be installed in grooves in a manner that they cannot work out onto the carriage way.(4)(a) Log decks shall be provided with effective means to prevent logs from accidentally rolling down the deck onto the carriage or its runway.(b) Swing saws. Swing saws on log decks shall be equipped with a barricade and stops for protection of employees who may be on the opposite side of the log haul chute.(c) Drag saws. Where reciprocating log cutoff saws (drag saws) are provided, they shall not project into walkway or aisle.(d) Circular cutoff saws. Circular log bucking or cutoff saws shall be so located and guarded as to allow safe entrance to and exit from the building.(e) Entrance doorway. Where the cutoff saw partially blocks the entrance from the log haul runway the entrance shall be guarded.(5) A barricade or other positive stop shall be erected between the sawyer's stand and the log deck to protect the sawyer from rolling logs. Such barricade or stop shall be of sufficient strength to stop any log.(6) Chains from overhead canting gear or other equipment shall not be allowed to hang over the log deck in such manner as to endanger workers.(7) Canting gear control levers shall be so arranged that they move away from the carriage to operate.(8) Moving parts or equipment on or about log decks shall be guarded.(9) Peavies, canthooks and other hand tools shall be kept in good repair at all times.(10) Workers shall not go below logs on decks that are likely to roll or be rolled. Means of access shall be provided to the head rig which does not subject employees to the hazard of moving logs or equipment.