Section 296-59-015. General requirements.

(1) The use of any machinery, tool, material, or equipment which is not in compliance with any applicable requirement of this chapter is prohibited. Such machine, tool, material, or equipment shall either be identified as unsafe by tagging or locking the controls to render them inoperable or shall be physically removed from its place of operation.

(2) The employer shall permit only those employees qualified by training or experience to operate equipment and machinery.

(3) Employees shall use safeguards provided for their protection.

(4) Loose or ragged clothing, scarfs, or ties shall not be worn while working around moving machinery.

(5) Workers should not be assigned or permitted to occupy work locations directly under other workers. When such practice is unavoidable, all parties shall be made aware of the potential hazard and adequate protective measures shall be taken. When adequate protective measures are not available, one party shall be moved to eliminate the potential exposure.

(6) Employees shall report to their employers the existence of any unsafe equipment or method, or any other hazard which, to their knowledge, is unsafe. Where such unsafe equipment or method or other hazard exists in violation of this chapter it shall be corrected.

(7) Housekeeping.

(a) All places of employment shall be kept clean to the extent that the nature of the work allows.

(b) The floor of every workroom shall be maintained so far as practicable in a dry condition. Where wet processes are used, drainage shall be maintained. Where necessary or appropriate, waterproof footgear shall be worn.

(c) To facilitate cleaning, every floor, working place, and passageway shall be kept free from protruding nails, splinters, loose boards, unnecessary holes and openings or other tripping hazards.

(d) Cleaning and sweeping shall be done in such a manner as to minimize the contamination of the air with dust and so far as is practical, shall be done outside of working hours.

(8) Requirements for warning signs. Ski area operations which use any form of explosive device for avalanche control shall display warning, information placards and/or signs as found in chapter 296-52 WAC, Part G.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 06-19-074, § 296-59-015, filed 9/19/06, effective 12/1/06. Statutory Authority: Chapter 49.17 RCW. WSR 88-14-108 (Order 88-11), § 296-59-015, filed 7/6/88.]

RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 06-19-074, § 296-59-015, filed 9/19/06, effective 12/1/06. Statutory Authority: Chapter 49.17 RCW. WSR 88-14-108 (Order 88-11), § 296-59-015, filed 7/6/88.

Rules

296-52,