Section 296-150R-0290. When and where should the insignia and the vehicle identification label be attached to the vehicle?

(1) Insignia must be attached to the finished vehicle before it leaves the approved manufacturer's location.

(2) The state-plan or self-certification insignia must be attached adjacent to the main door, on the strike side of the door, at least twelve inches above the floor line. The strike side of the door is opposite the hinge side of the door.

(3) The alteration insignia must be attached next to the certification insignia.

(4) The vehicle identification number (VIN) label must be attached on the vehicle as required by the Federal Department of Transportation. Any other vehicle identification label must be attached next to the certification insignia or on the exterior front half of the left side of the vehicle, at least six inches above the floor line.

[Statutory Authority: RCW 43.22.340, [43.22.]355, [43.22.]360, [43.22.]432, [43.22.]440 and [43.22.]480. WSR 96-21-146, § 296-150R-0290, filed 10/23/96, effective 11/25/96.]

RCW 43.22.340, [43.22.]355, [43.22.]360, [43.22.]432, [43.22.]440 and [43.22.]480. WSR 96-21-146, § 296-150R-0290, filed 10/23/96, effective 11/25/96.