Section 246-272B-01000. Purpose and objectives.

Section 246-272B-01100. Acronyms and definitions.

Section 246-272B-01200. Applicability and relationship to other statutes and regulations.

Section 246-272B-01300. General requirements.

Section 246-272B-02000. Site review—Predesign report, soil characterization, and site inspection.

Section 246-272B-02050. Environmental review—Site risk survey and hydrogeology report.

Section 246-272B-02100. Engineering.

Section 246-272B-02150. LOSS 14,500 gpd and below—Operating permit application and approval to construct.

Section 246-272B-02200. LOSS greater than 14,500 gpd—Operating permit application.

Section 246-272B-02250. LOSS greater than 14,500 gpd—Public notice.

Section 246-272B-02300. LOSS greater than 14,500 gpd—Operating permit and approval to construct.

Section 246-272B-02350. Construction.

Section 246-272B-02400. LOSS constructed on or before July 1, 1984.

Section 246-272B-02450. LOSS with current permit from department of ecology or local health jurisdiction.

Section 246-272B-02500. LOSS constructed after July 1, 1984, without current operating or discharge permit.

Section 246-272B-02550. LOSS modifications.

Section 246-272B-02650. Operating permit renewals.

Section 246-272B-02700. Operating permit requirements and conditions.

Section 246-272B-03000. Site review—Predesign report.

Section 246-272B-03100. Site review—Inspection.

Section 246-272B-03200. Environmental review—Site risk survey.

Section 246-272B-03300. Environmental review—Hydrogeology report.

Section 246-272B-03400. Soil characterization.

Section 246-272B-03500. Minimum land area.

Section 246-272B-04000. Engineering report.

Section 246-272B-04100. Management plan.

Section 246-272B-04200. Operations and maintenance manual.

Section 246-272B-04300. Monitoring and reporting plan.

Section 246-272B-04400. Plans and specifications.

Section 246-272B-05000. Installer qualifications and responsibilities.

Section 246-272B-05100. Construction oversight and testing.

Section 246-272B-05200. Water tightness testing of sewage tanks.

Section 246-272B-05300. Department final inspection.

Section 246-272B-05400. Post-construction documentation.

Section 246-272B-06000. General design requirements.

Section 246-272B-06050. Horizontal setbacks.

Section 246-272B-06100. Vertical separation.

Section 246-272B-06150. Design flows.

Section 246-272B-06200. Sewage characterization.

Section 246-272B-06250. Treatment.

Section 246-272B-06350. Drainfields.

Section 246-272B-06400. Design requirements to allow monitoring and maintenance.

Section 246-272B-06450. Sewage tanks.

Section 246-272B-06500. Collection, conveyance, and other piping appurtenances.

Section 246-272B-06550. Public domain and proprietary technologies.

Section 246-272B-06600. Pressure distribution.

Section 246-272B-06650. Subsurface drip systems.

Section 246-272B-06700. Sand-lined trenches and beds.

Section 246-272B-06750. Intermittent sand filters.

Section 246-272B-06800. Recirculating gravel filters.

Section 246-272B-06850. Cesspools and seepage pits.

Section 246-272B-06900. Holding tank sewage systems.

Section 246-272B-07000. Management requirements.

Section 246-272B-07050. Operations and maintenance requirements.

Section 246-272B-07100. Department inspections.

Section 246-272B-07150. Reliability and emergency response.

Section 246-272B-07200. Operator qualifications and responsibilities.

Section 246-272B-07250. Metering.

Section 246-272B-07300. Sewage tank management.

Section 246-272B-07400. Modifications.

Section 246-272B-07450. Failures.

Section 246-272B-07500. Abandonment.

Section 246-272B-07550. Connection to a sanitary sewer system.

Section 246-272B-08000. Waivers.

Section 246-272B-08100. Enforcement.

Section 246-272B-08200. Notice of decision, appeals, and adjudicative proceedings.

Section 246-272B-08300. Third-party appeals to department permit decisions for LOSS over 14,500 gpd and adjudicative proceedings.

Section 246-272B-09000. Severability.